Thermo Scientific Ion Torrent A45727 Скачать руководство пользователя страница 40

Страница: 40 / 163

In the Save step, enter a name and a short name for the assay, an optional

description, then click Save.

The assay appears in the Manage Assays screen with the name you entered.

In the Manage Assays screen, click Lock in the Actions column of the assay to

prevent changes to the assay.
The assay must be locked to be available for use when creating a run plan.

Copy an assay (manager/administrator)

Manager- and administrator-level users can create a new assay by copying an existing

system-installed assay or other custom assay and modifying it as needed.

In the menu bar, click (Assay)

Manage Assays.

In the Assay > Manage Assays screen, in the Actions column for the assay that

you want to copy, click Copy.

The Copy command may be located in the (Expand) menu.
The Assay > Create Assay screen opens to the Panel step. The assay settings can

be modified for the new assay.

Proceed through the workflow steps, and modify assay settings as needed.

Chapter 3

Create and manage assays (manager/administrator)

Copy an assay (manager/administrator)

Genexus

™

Integrated Sequencer User Guide

Содержание Ion Torrent A45727




































































































































































Результаты поиска

Содержание Ion Torrent A45727

Отзывы:

Похожие инструкции для Ion Torrent A45727

Бренды по названию

Популярные бренды

Thermo Scientific Ion Torrent A45727, Руководство пользователя

Результаты поиска

Содержание Ion Torrent A45727

Отзывы:

Похожие инструкции для Ion Torrent A45727

Бренды по названию

Популярные бренды