Thermo Scientific Ion 520 Скачать руководство пользователя страница 35

Страница: 35 / 78

Confirm that consumables are correctly installed

• Confirm that each cartridge is at the correct location and in the correct orientation.

• Press down on all cartridges to confirm that they are firmly pressed into place.

• Confirm that all tubes in the Ion S5

™

ExT Chef Reagents cartridge, including the tube of NaOH in

Position C, are uncapped and firmly pressed into place.

• Confirm that the centrifuge lids are installed correctly so that the port is oriented toward the rear of

the instrument.

• Confirm that the tube and chip buckets are seated securely in the rotor arms of the Chip-loading

and Recovery centrifuges, and that the consumables they contain are correctly installed.

CAUTION!

To ensure correct and safe instrument operation, you must confirm that all consumables

are installed correctly to the deck before you start a run. The Ion Chef

™

Instrument does not verify all

aspects of the consumable setup before beginning each run.

Chapter 4

Start the Ion Chef

™

run

Load the Ion Chef

™

System

Ion 520

™

& Ion 530

™

ExT Kit − Chef User Guide

Содержание Ion 520















































































Результаты поиска

Содержание Ion 520

Отзывы:

Бренды по названию

Популярные бренды

Thermo Scientific Ion 520, Руководство пользователя

Результаты поиска

Содержание Ion 520

Отзывы:

Бренды по названию

Популярные бренды