Thermo Scientific invitrogen PowerEase Touch, Руководство пользователя

Страница: 15 / 38

5.
Edit the method by touching Edit , then save the method using a new name (see Figure 9) or begin
the run by touching Start run .
Note: For a pre-programed method, only the run time can be edited until it is saved as a custom
method.
IMPORTANT!
For a given gel buffer type (Tris-Glycine, Bis-Tris, etc.) and run voltage, gel
run times are dependent on several factors. Factors such as running buffer concentration and
temperature, type of gel tank used (because of the electrical path distance between anode and
cathode wires), gel separation gradient and level of running buffer above the wells can affect run
times to some degree. So, the exact run time for your gel may be slightly different than the default
value given by the pre-programed method. The default run times shown in mini gel pre-programed
methods assume the use of the Invitrogen
™
Mini Gel Tank (Thermo Fisher Scientific (Cat. No.
A25977)). Midi gel run times assume the use of the Invitrogen
™
SureLock
™
Tandem Midi Gel Tank
(Thermo Fisher Scientific (Cat. No. STM1001)).
Figure 7 Pre-programed Methods screens
For example: The pre-programed method for running Invitrogen
™
NuPAGE
™
Bis-Tris gels with MES
running buffer is shown in Figure 8.
Once the run has started, the Run screen will display real time parameter values. To view run
parameters as they were set, touch the right arrow to view the Method Settings screen (see Figure 12).
Chapter 2
Methods
Select a pre-programed method
2
PowerEase ™ Touch 600W Power Supply User Guide
15