20
E-Gel
™
Power Snap Electrophoresis System User Guide
Cancel the
run
1.
Press
Pause run
to temporarily stop the run.
2.
Press
the status dial.
3.
Press
Cancel run
to stop the run.
Edit gel
duration
1.
Press
Pause run
to temporarily stop the run.
2.
Press
the status dial.
3.
Press
Edit gel duration
.
4.
Adjust
the
protocol duration
using the +/– buttons or
press in the duration field to open a keyboard to enter a
number.
5.
Select
Resume
to restart the run.
Note
: Do not run the same gel multiple times or extend the
gel protocol beyond the maximum allowed duration.
Running the gel past the allowed duration will damage the
gel and result in poor sample separation.
Change to
another
protocol
1.
Press
Pause run
to temporarily stop the run.
2.
Press
the status dial.
3.
Press
Cancel run
to stop the run.
4.
Press
Set up run
.
5.
Select
another E-Gel
™
protocol (e.g.,
Reverse E-Gel
).
Use the up/down arrows to navigate through the
menu.
6.
Press
Start run