manualshive.com logo in svg

Thermo Scientific Invitrogen Countess II FL, Руководство пользователя

Поделиться
Скачать
Thermo Scientific Invitrogen Countess II FL Скачать руководство пользователя страница 54

Change light cube

The Countess

™

 II FL Automated Cell Counter can accommodate up to two EVOS

™

light cubes. Each user-interchangable, auto-configured EVOS

™

 light cube contains an

LED, collimating optics, and filters for fluorescence applications. EVOS

™

 light cubes

do not come standard with the device and must be purchased separately (“EVOS

™

light cubes“ on page 64). To install or change a light cube:

1.

Press the Instrument Settings button   on the Home page (“Turn ON the

instrument“ on page 13) to open the Instrument Settings screen.

2.

Press Change Light Cube. The instrument positions the light cube tray to enable

light cube installation.

3.

When prompted, power off the Countess

™

 II FL Automated Cell Counter using

the power switch on the back of the instrument (“Instrument exterior

components“ on page 11).

4.

Unplug the power cord from the Countess

™

 II FL Automated Cell Counter.

5.

Unlatch the back panel with the two captive ¼-turn fasteners (indicated by red

arrows) that secure the back panel on the rear of the Countess

™

 II FL Automated

Cell Counter and remove the back panel.

6.

Place the light cube into one of the empty slots in the back of the device.

Install or change

EVOS

™

 light cube

Chapter 8 

Instrument settings

Change light cube

8

54

Countess

™

 II FL automated cell counter User Guide

Содержание Invitrogen Countess II FL



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды