Thermo Scientific Invitrogen Countess II FL Скачать руководство пользователя страница 12

Страница: 12 / 82

Getting started

Installation

• Place the instrument on a level surface away from vibrations emanating from

other pieces of equipment.

• Allow at least 5 cm (2 in) free space at the back of the instrument to allow for

proper ventilation and prevent overheating of electronic components.

• Set up the instrument away from direct light sources, such as windows. Ambient

room lighting can enter the imaging path and affect the image quality.

• Operating temperature range: 4°–32

℃

(40°–90°F).

• Relative humidity range: <80%.

IMPORTANT!

Do not position the instrument so that it is difficult to turn off the main

power switch located on the back of the instrument (“Instrument exterior

components“ on page 11).
In case of an instrument malfunction, turn the main power switch to the OFF position

and disconnect the instrument from the wall outlet.

Unpack the instrument and place the instrument on a flat, level, dry surface.

Remove the thin plastic protector film from the touch-screen display.

Plug one end of the power cord appropriate for your region into the instrument.

Plug the power cord into the electrical outlet. Be sure to use only the power cord

supplied with your instrument. Powering the instrument with an unapproved

power cord may damage the instrument.

Operating

environment

Install the

instrument

Countess

™

II FL automated cell counter User Guide

Содержание Invitrogen Countess II FL



















































































Результаты поиска

Содержание Invitrogen Countess II FL

Отзывы:

Бренды по названию

Популярные бренды

Thermo Scientific Invitrogen Countess II FL, Руководство пользователя

Результаты поиска

Содержание Invitrogen Countess II FL

Отзывы:

Бренды по названию

Популярные бренды