Thermo Scientific iCAP Q, Руководство по эксплуатации

Страница: 76 / 134

Operation
Working with LabBooks
6-14 iCAP Q Operating Manual (P/N 1288090, Revision B) Thermo Fisher Scientific
Working with LabBooks
Usually, your Lab Manager will provide you a template or a prepared
LabBook for the measurements that are done upon a routine basis.
These templates can be converted into Labbooks, which are then loaded
inside the Experiment Editor.
For the data evaluation methods available in Qtegra, see Table 6-2 :
Loading a LabBook
❖
To load a LabBook
1. On the Home Page of the Experiment Editor , click the Analysis tab
to display the Analysis page.
2. Open a recent LabBook or an existing LabBook:
•
To load a recent LabBook, click a LabBook in the Recent
LabBooks section.
•
To load an existing LabBook, do the following:
a. Click Open in the Open LabBook section.
b. In the Browse for LabBook dialog box, select a LabBook.
c. Click OK to open the LabBook.
3. The LabBook opens in a new tab of the Experiment Editor.
Table 6-2. Evaluation methods in Qtegra
Method Description
aQuant Data evaluation method for standard addition
eQuant Data evaluation method for external calibration
Raw data Data evaluation method on raw data only
rQuant Data evaluation method for isotope dilution
analysis
tQuant Data evaluation method for time resolved
analysis (for example chromatography)
trQuant Data evaluation method for time resolved
analysis (for example laser ablation)