Thermo Scientific HistoStar, Руководство оператора

Страница: 99 / 128

91
Chapter 5 - Cleaning and Maintenance
Safety
Before carrying out any cleaning or maintenance on the HistoStar , ensure that the following safety statements
have been read and understood.
Check HistoStar for damage prior to performing any cleaning or maintenance. If any
damage is noted, remove the unit from service immediately and contact the Thermo
Fisher Scientific Service Department.
Molten wax is hot and can cause severe burns.
Allow all surfaces, hot or cold, to reach room temperature prior to cleaning.
When dealing with solvents and cleaning chemicals, take all suitable precautions to
minimize exposure during cleaning.
Cold plate should be switched off when not in use to prevent excessive frost build up.
Before using any cleaning or decontamination method except those specified in this
document, users should check with their Thermo Fisher Scientific representative that the
proposed method will not damage the unit.
If the HistoStar has been used with, or has come into contact with hazardous material,
ensure that the appropriate decontamination procedures have been followed (See World
Health Organization 'Laboratory Biosafety Manual').