Thermo Scientific Heracell Vios 160i CR, Руководство по эксплуатации

Страница: 186 / 216

12
Data Communication
Error Memory Structure
12-8
Heracell Vios 160i / 250i CR
Thermo Scientific
Note on *3) sterilization and auto-start run status:
Error Memory Structure
The error memory contains 22 error messages. A query is responded with 22 data sets with a colon as
separator and can be queried using the following commands:
Query: ?:2300:00::cc<CR>

Reading the first 11 error memory entries.
Query: ?:2301:00::cc<CR>

Reading the first 11 error memory entries.
These data sets consist of 11 byte and are encrypted in 21 ASCII characters prior to data transmission.
Example: The byte 0x23 is converted into the ASCII characters 0x32 (“2”) and 0x33 (“3”).
• Byte 1 consists of 1 characters,
• Bytes 2 - 11 consist of 2 characters.
Therefore, a response consists of 1+(10 x 2) = 21 data bytes plus separator.

A data set always delivers the date, the time, the faulty control loop, the device status, and the error
message.
Bit Disinfection auto-start
0x00 Steri-Run not activated auto-start not activated
0x01 Initialization Initialization
0x02 Wait until open door time expires Wait until open door time expires
0x03 Wait until door closes Wait until door closes
0x04 Start Start
0x05 Heating Heating
0x06 Holding Perform reverse voltage adjustment
0x07 Condensation Waiting period 1
0x08 Cool-Down Set tolerance band
0x09 Dry Establish stable humidity
0x0A Wait for enable Perform reverse voltage adjustment
0x0B Cancellation Waiting period 2
0x0C - Determine offset
0x0D - Read offset, check
0x0E - Release
0x0F - Cancellation