Thermo Scientific
GENESYS 30 User Guide
13
Quant
The GENESYS 30 Quant application supports up to six standard solutions and offers linear
fits with the option to force the line through zero.
1. Set the analytical wavelength.
a. Navigate to the Units tool and press
.
b. Select the units from the pop-up grid.
2. Enter the concentrations of your standard solutions.
Any number of standards up to 6 is allowed.
3. Navigate to the
Conc
field for STD1.
Use the keypad to enter the concentration of STD1 and press
to accept the value.
The focus moves to the field for STD2.
Clear tool
Save tool
Set the measurement
wavelength
Set the display unit
Select a linear data fit with a
non-zero intercept
Select a linear data fit forced
through zero
Message bar - look here for
instructions and reports
Baseline status
indicator
