EVOS
™
M5000 Imaging System User Guide
75
Change the objectives
To customize your EVOS
™
M5000 Imaging System, you can add and remove
objectives to fit the instrument’s functionality to your own specific research needs.
Procedure for
objective change
1.
Remove the objective you want to
replace from the objective turret.
You may need to move the stage so
that the objectives are accessible.
Note the indicated position (1–5) of
the removed objective on the turret
(red arrow).
2.
Screw the new objective into the
open position in the objective
turret. Note the part number of the
objective and the turret position. In
this example, the new objective is
installed into the turret position 5.
3.
Go to the
Settings
Objective Selection and
Calibration
tab
,
then find
the objective in the
Objectives
list that
matches the newly
installed objective.
Note:
Calibrate the newly installed objective before using it (page 76).
