Thermo Scientific Dionex, Руководство оператора

Страница: 35 / 228

3 • SP Sample Preparer Description
Doc. 065250-06 03/2020
23
Software Communication
The USB (Universal Serial Bus) receptacle (“B” type connector) (see Figure 3-2 )
allows connection to the computer on which Chromeleon 7 PA is installed.
A USB cable (P/N 960779) is provided in the SP Ship Kit (SP1, P/N 069085; SP2,
P/N 069086). The cable is 5 m (16 ft) long.
3.4 SP Liquid Leak Sensor and Drain
A leak sensor is located inside the SP enclosure, in the bottom front of the
enclosure. If the leak sensor becomes wet, it reports the leak to Chromeleon 7 and
an error message is displayed in the Chromeleon 7 audit trail.
An auxiliary leak sensor (P/N 067728) can be installed in the AE drip tray and
connected to the main SP electronics board.
Any liquid that collects in the bottom of the SP exits through the drain port in the
tray at the front of the SP enclosure. A drain line can be connected to this port, if
you want.
Figure 3-3. SP Power Switch
SP Power Switch