Dionex Reagent-Free Controller
74
Doc. 031880-04 1/12
9. Press
ENTER
.
10. Press
to select the current, for example, 117 mA. Press
ENTER
.
Figure 75. Example Suppressor Current Selection
B.7
Dionex RFC-30 Initial Setup
Set the EGC Type
1. From the default screen, press
twice to display the generator type
screen.
Figure 76. EGC Type Screen
2. Press
ENTER
. The
GENERATOR TYPE=
entry field on the screen is
highlighted, indicating that this parameter can be edited.
Figure 77. Selecting the EGC Type
3. Press
to select the type of EGC you will be installing; for example,
KOH.
Figure 78. Example EGC Type Selection
4. Press
ENTER
.
