Thermo Scientific Dionex ICS-5000, Руководство оператора

Страница: 356 / 482

Dionex ICS-5000 Operator’s Manual
340
Doc. 065342-06 12/11
9.14.4 Installing and Conditioning a New Capillary EGC
Figure 9-18 shows the EG flow schematic for a capillary IC system
.
Refer to
this figure when performing EGC and CR-TC service procedures in a
capillary IC system.
Flushing the Capillary EGC
1. Remove the new EGC from the shipping container.
NOTE
Save the shipping container; it may be required for
storage or disposal of the EGC.
Capillary
IC
Figure 9-18. EG Flow Schematic Example for Capillary IC Systems
EGC
OUT
TO PUMP/DAMPER
EGC
IN
To CR-TC
Regen Out
(blue label)
To CR-TC
Eluent In
(red label)
E
L
U
E
N
T
O
U
T
R
E
G
E
N
IN
To EG Degas
Regen Out
(blue label)
To CR-TC
Regen In
(orange label)
Vent
WASTE, GAS
SEPARATOR
To CR-TC
Eluent Out
(yellow label)
To EG Degas
Eluent In
(red label)
EG
Degas
Cartridge
(inside DC)
ELUENT IN
REGEN OUT
ELUENT OUT
To Inject
Valve
EGC
(Capillary)
Tubing Assembly Key
0.25 mm (0.010 in) ID Black
PEEK, 86 cm (34 in) (P/N 068658)
0.062 mm (0.0025 in) ID Blue
PEEK, 18 cm (7 in) (P/N 072204)
0.062 mm (0.0025 in) ID Blue
PEEK, 61 cm (24 in) (P/N 072203)
0.25 mm (0.010 in) ID Black
PEEK, 64 cm (25 in) (P/N 072224)
1.58 mm (0.062 in) ID Clear
ETFE, 2.1 m (7 ft) (P/N 072225)
1
3
2
4
5
1
2
3
4
5
Capillary
IC