Thermo Scientific Dionex ICS-5000, Руководство оператора

Страница: 24 / 482

Dionex ICS-5000 Operator’s Manual
8
Doc. 065342-06 12/11
upper compartment of the DC. For a dual-system, two IC Cubes can be
installed.
Dionex ICS-5000 Automation Manager (AM)
The AM consists of a component mounting panel on a base tray. The AM
provides mounting sites for sample preparation and post-column application
components: high-pressure (switching) valves, low-pressure (solenoid)
valves, reaction coils, etc. The AM is installed in the upper compartment of
the DC, above the detector.
Dionex ICS-5000 Thermal Compartment (TC)
The TC provides a temperature-controlled environment for Dionex ICS-5000
chromatography components. The TC is intended for applications that do not
require conductivity or electrochemical detection.
The TC is available in four configurations:
•
With one 2-position, 6-port high-pressure injection valve
•
With two 2-position, 6-port high-pressure injection valves
•
With one 2-position, 6-port high-pressure injection valve and one 2-
position, 10-port high-pressure injection valve
•
With no injection valves
An optional temperature stabilizer (standard bore, P/N 064548; microbore,
P/N 064650) can be installed inside the TC, if necessary. The temperature
stabilizer brings the eluent to the column temperature before it enters the
column.
Dionex AS-AP Autosampler (AS-AP)
The AS-AP provides high-performance, automated sample processing for ion
chromatography applications. Key features of the AS-AP include:
•
Excellent reproducibility with RSDs less than 0.3% for full-loop
injections
•
All-PEEK
™
flow paths, compatible with aqueous and reversed-phase
eluents, safe from metal contamination