Thermo Scientific Dionex ICS-2000, Руководство оператора

Страница: 43 / 390

2 • Features
Doc. 031857-03 4/06
2-23
2.3 Flow Schematics
The following figures illustrate the liquid flow path through an ICS-2000 when
using suppression in autorecycle mode. Three configurations are shown:
•
Figure 2-13 illustrates the liquid flow path when the components required for
producing KOH, LiOH, MSA, or NaOH eluent are installed. The required
components include the corresponding type of EluGen cartridge and a CR-
TC.
•
Figure 2-14 illustrates the liquid flow path when the components required for
producing carbonate/bicarbonate eluent are installed. The required
components include an EGC II K
2
CO
3
EluGen Cartridge, an EPM
Electrolytic pH Modifier, and an EGC CO
3
Mixer.
•
Figure 2-15 illustrates the liquid flow path when the components required for
producing carbonate eluent are installed. The required components include an
EGC II K
2
CO
3
EluGen Cartridge and an EGC CO
3
Mixer.