Thermo Scientific Dionex Easion, Руководство оператора

Страница: 48 / 126

Dionex Easion Operator’s Manual
40
Doc. 155028-01 08/20
3.11.3 Automated (Batch) Sample Processing
NOTE This section provides a brief overview of the steps
required to perform sample analyses using Chromeleon.
For detailed instructions, refer to the Chromeleon Help.
To process samples automatically, first add sample injections to a
Chromeleon sequence. (A sequence determines how a group of injections
will be analyzed and the order in which they will be run.) For each
injection, a sequence typically includes these elements:
•
An instrument method—A predefined list of commands and
parameters for controlling the system and acquiring sample data.
•
The chromatographic data acquired.
•
A processing method—A predefined set of instructions for evaluating
the data acquired.
•
Templates for displaying chromatographic data on the screen and for
printing reports.
There are two ways to create a sequence in Chromeleon:
•
eWorkflows provide predefined templates and rules for creating new
sequences. If they have been defined for your laboratory, eWorkflows
are the recommended method for creating a sequence.
•
The Sequence Wizard provides a series of dialog boxes that guide you
through the process of creating a sequence.
After creating the sequence, you are ready to start automated sample
processing.
Summary of Automated Sample Processing
1. Complete the instructions in Section 3.2 through Section 3.10 to
prepare the Dionex Easion for operation and to prepare the samples
for processing.
2. If a Dionex AS-DV is installed: Prepare and fill sample vials and
place them in the autosampler tray. Refer to the autosampler manual
for detailed instructions.