Thermo Scientific Dionex AS-DV, Руководство оператора

Страница: 63 / 132

3 • Operation and Maintenance
Doc. 065259-05 10/12
53
•
When you create the sequence (see Section 3.6 ), enter the volume of
the loop installed on the injection valve in the Inj. Vol. box. The
Dionex AS-DV always injects a full loop volume.
3.8.8 Using Sample Overlap Mode
The Dionex AS-DV can be configured to overlap sample preparation
functions. This means that while data collection is occurring for one
injection, the Dionex AS-DV performs the sample preparation steps for
the next injection in the sequence. The overlapped steps include Dionex
AS-DV commands that occur before the
EndSamplePrep command in
the instrument method or program.
For sample overlap to occur, the BeginOverlap command must also be
present in the instrument method or program. When sample overlap mode
is enabled (see
page 55 ) and you use the Instrument Method Wizard or