Thermo Scientific DensityPRO, Инструкция по применению

Страница: 40 / 101

DensityPRO Setup
Other Meas Assign Modify
4-6 DensityPRO with F
OUNDATION
™ fieldbus Application Guide Thermo Fisher Scientific
The Other meas assign & modify menu allows you to configure other
measurements and modify existing ones.
Other Meas
Assign Modify
1. Go to AI_TRANSDUCER > Root Menu >Setup > 4 Other meas
assign modify > Other meas assign modify.
2. When prompted, remove the loop from automatic control.
3. Select measurement: You can configure three measurements in
addition to the primary measurement. Enter which measurement you
want to configure or modify.
4. Reading represented by measurement: Select the readout type for the
measurement.
5. Unit selection/Time selection: Select the unit and/or time unit as
required.
6. Reading for high end/low end values: Enter the values that represent
the highest and lowest measurement readings.
7. Measurement configuration/modification is complete. The loop may be
returned to automatic control.
View Other
Meas
The View other meas item allows you to view other configured
measurements and their current value.