Thermo Scientific Barnstead GenPure, Руководство по эксплуатации

Страница: 33 / 106

7
Installation
Wall mounting
Thermo Scientific GenPure 27
Wall mounting
The wall mounting fixture (Item No. 50157885) supplied with the complete system
or purchased separately as an accessory.Before mounting the system on the wall,
verify the strength of the wall to ensure that it is suitable for supporting the system
(refer to the section Technical Specifications).
The screws and anchors supplied with the wall mounting brackets are only suitable
for attaching the wall mounted bracket to a 16 inch wooden stud construction,
concrete, or solid masonry wall.
Detailed instructions and needed hardware for mounting the bracket on the wall are provided with the
Wall Mounting Kit. The kit adapts to the typical stud spacing of 16 inch.
Step Action Figure
1 Attach the 2 mounting BRACKETS to the back
plate of the Genpure system, using the (4x) M8 x
25 mm long screws and 10 mm tall spacers
(included in the kit). Attach as shown in the
figure.
Hook
(4x) Included
M8 x 25 mm

long screw
Side View of
(2x) Device
Mounted Bracket
Genpure

Back plate
Down

(floor)
Release Cord
(4x) included
10 mm Spacer