Thermo Scientific Applied Biosystems QuantStudio 6 Pro, Руководство пользователя, Страница: 51 / 241

(Optional) Scan a barcode using a barcode scanner
The instrument is compatible with an optional Handheld Barcode Scanner (Cat. No. 4488442 ,
purchased separately). The barcode scanner reads Code 128 (alphanumeric), which supports
128 ASCII character barcodes.
For safety information, see “Laser safety” on page 223 .
1.
Tap the Barcode field.
2.
Hold the scanner 20–30 cm away from a plate or container label and aim at the center of the
barcode, then press the trigger.
3.
Slowly move the scanning beam across the barcode until the scanner emits a high-pitched tone.
When the scanner scans a barcode, it automatically transmits the following information:
• Transmits the alphanumeric equivalent of the barcode to the
Barcode field.
• Transmits other reagent information.
For more information about the hand-held barcode scanner, see the user documentation provided with
the barcode scanner.
Load a plate into the instrument
IMPORTANT!
The instrument should be used by trained operators who have been warned of the
moving parts hazard.
CAUTION!
Use flat caps for 0.2-mL tubes and 0.1-mL tubes. Rounded caps can damage the heated
cover.
1.
Tap (Eject) to open the drawer.
2.
Load the plate onto the block.
• Well A1 of the plate is in the top-left corner of the block.
• If the plate has a barcode, the barcode faces the front of the instrument.
3.
Tap (Eject) to close the drawer.
Chapter 3
Create and run plates on the instrument
(Optional) Scan a barcode using a barcode scanner
3
QuantStudio ™ 6 Pro Real-Time PCR System and QuantStudio ™ 7 Pro Real-Time PCR System User Guide
51