Thermo Scientific AI 3000, Руководство по эксплуатации

Страница: 24 / 108

1
Introduction
Configurations of the 3000 Series Automatic Sampling System
6 AI 3000/AS 3000 Sampling System - Operating Manual Thermo Scientific
AS 3000 Auto-sampler Configuration
In this configuration the 105-position sample tray is used, mounted on the hub provided on
the dedicated support plate.
Figure 4. AS 3000 Auto-sampler Configuration
The support plates of the tray and the sampler are electrically connected to each other by
means of the proper connecting cable.
As a function of the configuration of installation, right or left, the support will be introduced
into the relevant housing on the base of the sampling unit.
Gemini Configuration
Consists of the installation of two AI 3000/AS 3000 II on the same GC.
• With the TRACE 1300/TRACE 1310 — the samplers are installed on the right side, one
on the front injector module and the other on the back injector module.
• With the TRACE GC Ultra — one sampler is installed on the left side of the GC, and
the other is installed on the right side.
Each autosampler operates simultaneously on its own relevant injector. In this configuration,
both autosampler are ready to inject the sample simultaneously, according to the programmed
method that is the same for both.
105-position Sample Tray
Note Gemini configuration is not possible with the FOCUS GC.