Thermo Scientific Accela PDA, Руководство по оборудованию

Страница: 30 / 128

2
Installation
Installation Checklist
10 Accela PDA Detector Hardware Manual Thermo Scientific
Installation Checklist
The following installation checklist is a brief summary of the steps you must complete in
sequence for the proper installation of the PDA detector.
U
Unpack and inspect your instrument. See page 11 .
U
Read the safety notices in the preface. See page xiv .
U
Make the initial instrument preparations. See page 11 .
U
Make the initial back panel connections. See page 12 .
U
Connect and install the LightPipe flowcell. See page 17 .
U
Power on the detector for the first time. See page 24 .
U
Install software and connect remote
communication outputs, as required. See page 21 .
U
Configure the Accela PDA Detector for
control from your chromatography data
system. See Chapter 3, “Configuration.”
U
Adjust the light throughput to the diode
array. For the Xcalibur data system, see
“Adjusting the Light Throughput with
the Xcalibur Data System”
on page 42 .
For the ChromQuest data system, see
“Adjusting the Light Throughput with
the ChromQuest Data System”
on
page 69 .
U
Calibrate the Accela PDA Detector. For the Xcalibur data system, see
“Calibrating the PDA Detector from the
Xcalibur Data System”
on page 44 .
For the ChromQuest data system, see
“Calibrating the PDA Detector from the
ChromQuest Data System”
on page 73 .
This detector was installed by:
(Name) (Date)