FH15 & FH30 Compact Pump System Operating Manual 1-1
Thermo Scientific
Section 1
Introduction
The FH15 & FH30 Compact Pump Systems, Figure 1-1, are enclosed in a
painted steel and anodized aluminum housing.
Figure 1-1.
FH15 & FH30 Compact Pump System
The Pump System can accommodate one or two tubes simultaneously
(depending on model) at controlled speeds as low as 20 rpm. Tubing is
held in place by stops bonded to the tubing and slots in the Tubing
Retainer Bracket. For a list of tube sets for use with the Pump System,
refer to Appendix A.
The latching occlusion bed allows quick loading or changing of tubing.
The Pump Head rotor contains three rollers for optimum flow and
positive flow checking. All units operate from an external DC power
supply and are supplied with a Universal Power Supply (see Input
Specification for operating voltage/frequency). This power supply provides
a DC output for connection to the pump drive.
GENERAL
DESCRIPTION
Occlusion Bed
Latch
Universal Power Supply
Tubing Retainer
Bracket
