FH10 MICROFLEX
®
Pump System Operating Manual 1-1
Thermo Scientific
Section 1
Introduction
The FH10 MICROFLEX Pump System is designed to pump fluid
through Microbore tubing by means of peristaltic action at very low flow
rates. It is ideal for sanitizers, reagent dispensing, analyzers, printing
systems, controlled feeding and non-human infusion procedures.
The FH10 MICROFLEX Pump System accommodates one tube at
controlled speeds as low as 1.7 rpm. Tubing is held in place by spring-
loaded Tubing Retainers. For a list of tubing sizes for use with the Pump
System, refer to Appendix A.
Figure 1-1.
FH10 MICROFLEX Pump System
The latching Occlusion Bed allows quick loading or changing of tubing.
The Pump Head rotor contains four rollers for minimum pulsation. All
units operate from an external DC power supply. The AC models are
supplied with a Universal Power Supply, which provides a DC output for
connection to the pump drive.
GENERAL
DESCRIPTION
Universal Power Supply
