Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 96 / 330

Operation
Instrument Controls Menu
3-42 Model 5028
i
Instruction Manual Thermo Fisher Scientific
Note
The digital inputs must be asserted for at least one second for the
action to be activated.
s
Not all of the I/O available in the instrument are brought out on the
supplied terminal board. If more I/O is desired, an alternative means of
connection is required. (See optional “ Terminal Block and Cable Kits ”.)
s
l
In the Main Menu, choose Instrument Controls > I/O
Configuration > Digital Input Settings .
DIGITAL INPUT SETTINGS:
>1 NOP MODE A
2 NOP AOUTS TO ZERO
3 NOP PUMP CNTRL
4 NOP PRES CNTRL
5 NOP NONE
RANGE AVG DIAGS ALARM
6 NOP NONE
7 NOP NONE
The Logic State menu item is used to change the selected I/O relay
to either normally open or normally closed. The default state is open,
which indicates that a relay connected between the digital input pin and
ground is normally open and closes to trigger the digital input action.
l
Press to toggle and set the logic state to normally open or
normally closed.
DIGITAL INPUT SETUP:
>LOGIC STATE OPEN
INSTRUMENT ACTION
RANGE AVG DIAGS ALARM
The Instrument Action submenu allows the user to choose the
instrument action that is assigned to the selected digital input.
l
In the Main Menu, choose Instrument Controls > I/O
Configuration > Digital Input Settings > select Relay > Instrument
Action
.
Logic State
Instrument Action