Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 94 / 330

Operation
Instrument Controls Menu
3-40 Model 5028
i
Instruction Manual Thermo Fisher Scientific
OUTPUT RELAY SETTINGS:
>1 NOP CONC ALARM
2 NOP LOCAL/REMOTE
3 NOP UNITS
4 NOP GEN ALARM
5 NOP NONE
RANGE AVG DIAGS ALARM
The Logic State menu item is used to change the selected I/O relay
to either normally open or normally closed. The default state is open,
which indicates that a relay connected between the digital output pin
and ground is normally open and closes to trigger the digital output
action.
l
Press to toggle and set the logic state to normally open or
normally closed.
OUTPUT RELAY SETUP:
>LOGIC STATE OPEN
INSTRUMENT STATE
RANGE AVG DIAGS ALARM
The Instrument State submenu allows the user to select the instrument
state that is assigned to the selected relay output. A submenu lists signal
types of either alarms or non-alarm to choose from.
l
In the Main Menu, choose Instrument Controls > I/O
Configuration > Output Relay Settings > select Relay >
Instrument
State .
CHOOSE SIGNAL TYPE:
>ALARMS
NON-ALARM
RANGE AVG DIAGS ALARM
The Alarms screen allows the user to select an alarm status for the
selected relay output. The currently selected item is shown by “<--” after
it. The I/O board status alarm is only present if the I/O expansion board
is installed.
l
In the Main Menu, choose Instrument Controls > I/O
Configuration > Output Relay Settings > select Relay > Instrument
State >
Alarms
.
Logic State
Instrument State
Alarms