Thermo Scientific 5028i, Инструкция по эксплуатации, Страница: 93 / 330

Operation
Instrument Controls Menu
Thermo Fisher Scientific Model 5028
i
Instruction Manual 3-39
The Network Time Protocol (NTP) Server screen is used to edit the IP
address of the NTP server. An NTP server may be used to periodically
synchronize the instrument’s real-time clock with a standard. More
information about the NTP servers and a list of public servers may be
found at http://www.ntp.org.
l
In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > NTP Svr .
NTP SERVER IP ADDRESS:
CURRENT: 0.0.0.0
SET TO: 0.0.0.0
MOVE CURSOR
CHANGE VALUE
SAVE VALUE
RANGE AVG DIAGS ALARM
The I/O Configuration menu deals with configuration of the analyzer’s
I/O system. The analog input configuration is displayed only if the I/O
expansion board option is installed.
l
In the Main Menu, choose Instrument Controls > I/O
Configuration
.
I/O CONFIGURATION:
>OUTPUT RELAY SETTINGS
DIGITAL INPUT SETTINGS
ANALOG OUTPUT CONFIG
ANALOG INPUT CONFIG
RANGE AVG DIAGS ALARM
Note
The Analog input config screen is visible only when the I/O
expansion board option is installed and the service mode is on . For
more information on the service mode, see “ Service Mode ” earlier in
“Program Versions Voltages”.
s
The Output Relay Settings menu displays a list of the 10 digital
output relays available, and allows the user to select the logic state and
instrument parameter for the relay selected.
Note
The digital outputs may take up to one second after the assigned
state occurs to show up on the outputs.
s
l
In the Main Menu, choose Instrument Controls > I/O
Configuration >
Output Relay Settings
.
Network Time Protocol Server
I/O Configuration
Output Relay Settings