Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 84 / 330

Operation
Instrument Controls Menu
3-30 Model 5028
i
Instruction Manual Thermo Fisher Scientific
SET PERIOD FOR SREC:
CURRENTLY: 5 MIN
SET TO: OFF ?
CHANGE VALUE SAVE
RANGE AVG DIAGS ALARM
The Memory Allocation Percent screen is used to select the percentage
of total memory that may be used by the selected record type (lrecs or
srecs). Percentages between 0 and 100% are available in increments of
10. Changing this value results in log erasure for both types of records,
and changing the percent allocated to one record type will automatically
change the other.
l
In the Main Menu, choose Instrument Controls > Datalogging
Settings > Configure Datalogging > Memory Allocation % .
SET PERCENT LRECS:
CURRENTLY: 50%
SET TO: 30% ?
CHANGE VALUE SAVE
RANGE AVG DIAGS ALARM
SET PERCENT LRECS:
CURRENTLY: 50%
SET TO: 30% ?
THIS WILL ERASE ALL LOGS! x
PRESS TO CONFIRM CHANGE
RANGE AVG DIAGS ALARM
The Data Treatment screen is used to select the data type for the selected
record type: whether the data should be averaged over the interval, the
minimum or maximum measured during the interval, or the current
value (last value measured). Data treatment doesn’t apply to all data, just
to the concentration measurement. All other data points log the current
value at the end of the interval.
Note
This feature is found in all iSeries instruments, but it is
recommended that the data type be set to ONLY the current value
(cur), as the datalogging averaging is done in addition to the normal
concentration averaging.
s
l
In the Main Menu, choose Instrument Controls > Datalogging
Settings > Configure Datalogging > Data Treatment .
SET LREC DATA TYPE:
CURRENTLY: AVG
SET TO: CUR ?
CHANGE VALUE
RANGE AVG DIAGS ALARM
SAVE
Memory Allocation Percent
Data Treatment