Thermo Scientific 5028i, Инструкция по эксплуатации, Страница: 276 / 330

C-Link Protocol Commands
Calibration
B-36 Model 5028
i
Instruction Manual Thermo Fisher Scientific
high volt a/b
This command reports the current high voltage for the detector. The
following example reports that the high voltage is 1400 V.
Send: high volt a
Receive: high volt a 1400
Send: high volt b
Receive: high volt b 1400
set high volt a/b value
This command sets the high voltage for the detector to value , where
value is a floating-point representation of the high voltage. The
following example sets the high voltage to 1445 V.
Send: set high volt a 1445
Receive: set high volt a 1445 ok
Send: set high volt b 1445
Receive: set high volt b 1445 ok
mass coef a/b
This command reports the current mass coefficient. The following
example reports that the mass coefficient is 7100.
Send: mass coef a
Receive: mass coef a 7100
Send: mass coef b
Receive: mass coef b 7100
set mass coef a/b value
This command sets the mass coefficient to user-defined values to value ,
where value is a floating-point representation of the coefficient. The
following example sets the mass coefficient to 7000.
Send: set mass coef a 7000
Receive: set mass coef a 7000 ok
Send: set mass coef b 7000
Receive: set mass coef b 7000 ok
thermal mass coef a/b
This command reports the current thermal mass coefficient. The
following example reports that the thermal mass coefficient is 19.0000.
Send: thermal mass coef a
Receive: thermal mass coef a 19.0000
Send: thermal mass coef b
Receive: thermal mass coef b 19.0000