Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 112 / 330

Operation
Alarms Menu
3-58 Model 5028
i
Instruction Manual Thermo Fisher Scientific
SET ANALOG OUTPUTS:
SETTING: ALL
OUTPUT SET TO: NORMAL
SET TO FULL SCALE
SET TO ZERO
RESET TO NORMAL
RANGE AVG DIAGS ALARM
The Instrument Configuration screen displays information on the
hardware configuration of the instrument.
Note
If the analyzer is in service mode, pressing will toggle the
selected item between yes and no.
s
l
In the Main Menu, choose Diagnostics >
Instrument Configuration
.
INSTRUMENT CONFIGURATION:
>I/O EXPANSION BOARD YES
DETECTOR BETA
DETECTOR B BETA
CHANGE VALUE SAVE
RANGE AVG DIAGS ALARM
The Contact Information screen displays the customer service
information.
l
In the Main Menu, choose Diagnostics > Contact Information .
CONTACT INFORMATION:
CALL CENTER: 508-520-0430
WWW.THERMOFISHER.COM
RANGE AVG DIAGS ALARM
The alarms menu allows the user to view a set of alarms for different
boards and displays a list of items that are monitored by the analyzer.
The number of alarms detected is displayed to indicate how many
alarms have occurred. If no alarms are detected, the number zero is
displayed.
If the item being monitored goes outside the lower or upper limit, the
status of that item will go from “OK” to either “LOW” or “HIGH”,
respectively. If the alarm is not a level alarm, the status will go from “OK”
to “FAIL”. The number of alarms detected is displayed to indicate how
many alarms have occurred. If no alarms are detected, the number zero
is displayed.
Instrument Configuration
Contact Information
Alarms Menu