Thermo Scientific 5028i, Инструкция по эксплуатации, Страница: 103 / 330

Operation
Instrument Controls Menu
Thermo Fisher Scientific Model 5028
i
Instruction Manual 3-49
The Number of Table Points screen allows the user to select how many
points are used in the analog input conversion table for the selected
channel. The instrument uses linear interpolation between the points
in this table to determine what the reading value is based on the analog
input voltage. Each point in the table consists of an analog input voltage
value (0–10.5 V) and a corresponding reading value. Only two points
are necessary for linear inputs, however a larger number of points may
be used to approximate non-linear inputs. The points range from 2 to
10, with a default of 2.
l
In the Main Menu, choose Instrument Controls > I/O
Configuration > Analog Input Config > select Channel > Table
Points .
NUMBER OF TABLE POINTS:
CURRENTLY: 2
SET TO: 10 ?
INC/DEC
SAVE VALUE
RANGE AVG DIAGS ALARM
The Table Point submenu allows the user to set up an individual table
point.
l
In the Main Menu, choose Instrument Controls > I/O
Configuration > Analog Input Config > select Channel >
Point 1–10
.
TABLE POINT 01 CONFIG:
>VOLTS 0.00
USER VALUE 0.00
RANGE AVG DIAGS ALARM
The Volts screen allows the user to set the input voltage for the selected
table point in the conversion table, from 0.00 to 10.50. The default
table is a two-point table with point 1: 0.00 V = 000.0 U and point 2:
10.00 V = 10.0 U, where U is the previously entered unit of measure.
l
In the Main Menu, choose Instrument Controls > I/O
Configuration > Analog Input Config > select Channel > select
Point > Volts .
TABLE POINT 01 VOLTS:
CURRENTLY: 0.00
SET TO: 00.0
0
MOVE CURSOR
CHANGE VALUE SAVE
RANGE AVG DIAGS ALARM
Number of Table Points
Table Points
Volts