Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 102 / 330

Operation
Instrument Controls Menu
3-48 Model 5028
i
Instruction Manual Thermo Fisher Scientific
The Descriptor screen allows the user to enter the descriptor, or
name, for the selected analog input channel. The descriptor is used in
datalogging and streaming data to report what data is being sent out.
The descriptor may be from 1 to 3 characters in length, and defaults to
IN1 to IN8 (user input channel number).
l
In the Main Menu, choose Instrument Controls > I/O
Configuration > Analog Input Config > select Channel >
Descriptor
.
ANALOG INPUT DESCRIPTOR:
CURRENTLY: IN1
I N1
ABCDEFGHIJKLMN BKSP
OPQRSTUVWXYZ PAGE
0123456789 ./- SAVE
RANGE AVG DIAGS ALARM
The Units screen allows the user to enter the units for the selected
analog input channel. The units are displayed on the diagnostic screen
and in datalogging and streaming data. The units may be from 1 to 3
characters in length, and defaults to V (volts).
l
In the Main Menu, choose Instrument Controls > I/O
Configuration > Analog Input Config > select Channel >
Units
.
ANALOG INPUT UNITS:
CURRENTLY: V
V
N1
ABCDEFGHIJKLMN BKSP
OPQRSTUVWXYZ PAGE
0123456789 ./- SAVE
RANGE AVG DIAGS ALARM
The Decimal Places screen allows the user to select how many digits are
displayed to the right of the decimal point, from 0 to 6, with a default
of 2.
l
In the Main Menu, choose Instrument Controls > I/O
Configuration > Analog Input Config > select Channel >
Decimal
Places .
DECIMAL PLACES:
CURRENTLY: 2
SET TO: 3 ?
INC/DEC
SAVE VALUE
RANGE AVG DIAGS ALARM
Descriptor
Units
Decimal Places