Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 101 / 330

Operation
Instrument Controls Menu
Thermo Fisher Scientific Model 5028
i
Instruction Manual 3-47
Concentrations Other Measurements Analog Inputs
Flow Temp Analog Input 8 (if the I/O expansion board
is installed)
Flow Vol
Beta
Beta Raw
Alpha Raw
Mass
Beta Zero
External Alarms
Beta Ref
Common Flags
Det A Flags
The Analog Input Configuration menu displays a list of the 8 analog
input channels available for configuration. This screen is only displayed
if the I/O expansion board option is installed. Configuration includes
entering the Descriptor, Units, Decimal Places, choice of 1–10 points in
the table, and corresponding number of points selected.
l
In the Main Menu, choose Instrument Controls > I/O
Configuration >
Analog Input Config
.
ANALOG INPUT CONFIG:
>CHANNEL 1 IN1
CHANNEL 2 IN2
CHANNEL 3 IN3
CHANNEL 4 IN4
CHANNEL 5 IN5
RANGE AVG DIAGS ALARM
CHANNEL 6 IN6
CHANNEL 7 IN7
ANALOG INPUT 01 CONFIG:
>DESCRIPTOR IN1
UNITS V
DECIMAL PLACES 2
TABLE POINTS 2
POINT 1
RANGE AVG DIAGS ALARM
POINT 2
Note
The Analog input config screen is visible only when the I/O
expansion board option is installed and the service mode is on . For
more information on the service mode, see “ Service Mode ” earlier in
“Program Versions Voltages”.
s
Analog Input Configuration