13
Emission Control
In compliance with the California ULG (Utility, Lawn and
Garden) Rules, the following information is provided:
1. Selection Of Fuel Oil:
Use diesel fuel only.
2-1. Modification To Any Engine Component:
Modifications to any engine component which many cause
engine exhaust emission output changes are not allowed.
Any engine modification not in compliance with regulation
will be the responsibility of the engine manufacturer, dealer or
customer who made the modification.
2-2. Air Induction System:
Air induction system must
remain intact and receive regular prescribed maintenance.
Example: Air cleaner element replacement at required
operation hour interval.
2-3. Exhaust System:
Exhaust system must remain intact
and cannot be modified in any manner that will further restrict
exhaust flow.
2-4. Fuel Oil System:
Fuel oil system must remain intact
and receive regular prescribed maintenance. Example: Fuel
filter replacement at required operation hour interval.
3. Engine Identification:
Engines must be identified in a
manner that will determine when they were built and what
regulations they comply with. The engine must be labeled with
an emission control label and the engine family name, both
described below.
Содержание UT-1280
