Thermo King T-1080S, Руководство по обслуживанию

Страница: 21 / 191

20
Maintenance Inspection Schedule
Pretrip 1,200
Hours
2,000
Hours
Annual/
3,000
Hours
Inspect/Service These Items
Microprocessor
• Run pretrip test (see “Pretrip Test” in Operating Instructions Chapter).
Engine
• Check fuel supply.
• • Check engine oil level.
• • Check condition of belts.
• • Check engine oil pressure hot, on high speed.
• • • • Listen for unusual noises, vibrations, etc.
• Check air cleaner hose for damage.
• Inspect and clean electric fuel pump filter.
• Check engine coolant level every 1,000 hours or 6 months
(whichever occurs first).
• Check that engine coolant antifreeze protection is at –30 F (–34 C)
every 1,000 hours or 6 months year (whichever occurs first).
• Dry air cleaner. Replace air cleaner element at 2,000 hours or 1 year
(whichever occurs first).
• Change EMI 2000 (black) fuel filter.
• Change engine oil and oil filters (hot). Requires oil with API Rating
CI-4 or better (ACEA Rating E3 for Europe) and EMI 2000 bypass oil
filter.
• Check restraining mount (snubber) pre-load adjustment.
• Drain water from fuel tank and check vent.
• Check and adjust engine speeds (high and low speed).
• Check condition of engine mounts.
• Test fuel injection nozzles at least every 3,000 hours.*
— Adjust engine valve clearance every 1,000 hours.
— Replace fuel return lines between fuel injection nozzles every 10,000
hours or sooner, as required.
— Change ELC (red) engine coolant every 5 years or 12,000 hours.
Units equipped with ELC have an ELC nameplate on the expansion
tank.
* Based on EPA 40 CFR Part 89.