Thermo King 919180, Руководство пользователя

Страница: 21 / 148

21
Maintenance Inspection Schedule
Pretrip 1,200
Hours
2,000
Hours
Annual/
3,000
Hours
Inspect/Service These Items
NOTE: The 1,200 hour maintenance interval may be
extended to 2,000 hours or 1 year (whichever occurs first)
when equipped with EMI fuel filter and EMI bypass oil filter.
Microprocessor
• Run pretrip test (see “Pretrip Test” in the Operating Manual).
Engine
• Check fuel supply.
• • Check engine oil level.
• • Inspect belts for condition and proper tension.
• • Check engine oil pressure hot, on high speed (should display “OK”).
• • • • Listen for unusual noises, vibrations, etc.
• • Dry air cleaner. Check air restriction indicator (if so equipped).
Change air cleaner element when indicator reaches 25 in. Replace
air cleaner element at 2,000 hours or 1 year (whichever occurs first) if
air restriction indicator has not reached 25 in.
If not equipped with an air restriction incicator, replace air cleaner
element at 2,000 hours or 1 year (whichever occurs first).
• Clean and service crankcase breather and check air cleaner hose for
damage.
• Change standard (white) fuel filter.
• Change EMI 2000 (black) fuel filter.
• Inspect and clean fuel prefilter and electric fuel pump filter.
• Drain water from fuel tank and check vent.
• Check and adjust engine speeds (high and low speed).
• Check condition of engine mounts.
• Maintain year round antifreeze protection at –30 F (–34 C).
— Change green engine coolant every 2 years.
— Change ELC (red) engine coolant every 5 years or 12,000 hours.
Units equipped with ELC have an ELC nameplate on the expansion
tank. See “ELC (Extended Life Coolant)” on page 62.
Engine Oil Change Intervals (see below)
NOTE: Change engine oil and filter (hot).
• Oil change interval with API classification CG-4 (or better) mineral oil
or synthetic oil.
• Oil change interval with API classification CG-4 (or better) mineral oil
or synthetic oil, and EMI 2000 bypass oil filter (see Tool Catalog).