Thermo King 098916, Руководство по обслуживанию

Страница: 63 / 196

Operating Instructions
62
The controller displays the actual temperature
offset when the sensor temperature is within 0.3 C
(0.5 F) above or below 0 C (32 F).
NOTE: The sensors should be in the ice bath
a total of 15 minutes or more to assure the
sensor temperature has bottomed out.
7. Press the F3 key to release the current actual
temperature offsets from the controller
memory. Observe the sensor temperatures in
the [NEW CORR] row.
8. Press the
F4
key to accept the new
temperature offsets when all sensor offsets
read b 0.3 C (+0.5 F) and - 0.3 C
(-0.5) and have been stable for 5 minutes. The
controller display will show the new offsets in
the [ACTUAL] row.
9. Press the
ESC
key to exit the Calibrate menu.
Set Trip Start
With the
U
NIT
O
N
/O
FF
switch
O
N
and the LCD
display showing the standard display (setpoint):
1. Press the
F2
or
F3
key to enter the Main
menu.
2. Press the
F2
or
F3
key to scroll through menu
list until [DATALOGGER] appears in LCD
display.
3. Press the
F4
key to access the Datalogger
menu. [INSPECT TEMP LOG] appears in the
LCD display.
4. Press the F2 or F3 key to scroll through
submenu until [ACTIVATE TRIPSTART]
appears in LCD display.
5. Press the F4 key to enter Tripstart function.
The date and time of the last trip start appears
in the screen.
6. Press the F4 key again to enter a new start of
trip date and time in the log.
NOTE: When a PTI test is completed, the
controller automatically enters a Tripstart in
the log.
7. Press the ESC key to exit the Datalogger
menu.