Thermo Electron Nicolet 380 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 135

Thermo Electron Nicolet 380 Скачать руководство пользователя страница 19

Your First Experiment

Warning

The Spectrometer Safety Guide that came with the system contains
important safety information. This guide is available in several
languages. Contact your local Thermo Electron office for
information about the languages that are available. Before you use
the system, read the entire guide. To prevent personal injury and
damage to equipment, follow the safety precautions contained in the
guide whenever you use the system.

▲

It’s easy to collect spectra with the spectrometer. By leaving the
system turned on at all times, you can keep it ready to use with a
minimum of preparation. Keeping the system on also improves its
stability and gives you more consistent results.

Note

If you have a dedicated system (such as a Liquid Analysis System)
that normally uses a software package other than OMNIC or
EZ OMNIC, skip this chapter.

▲

In this first experiment you will...

●

Power on the spectrometer

●

Select an experiment.

●

Collect a background spectrum.

●

Collect a sample spectrum.

●

Save the sample spectrum in a file.

You can learn all these things and more by running the on-line
tutorials provided with OMNIC. Start with the “Getting Started With
OMNIC” and “Spectrometer Tour” tutorials available through
Getting Started in the Help menu.

Nicolet 380 User’s Guide

13

«
...
17
18
19
20
21
...
»

Содержание Nicolet 380








































































































































Отзывы:

Нет отзывов