Thermia iTec Eco, Руководство пользователя

Страница: 11 / 32

Message Meaning
ROOM Shows the set ROOM value. Standard value: 20°C.
If the accessory room sensor is installed it shows the actual temperature and the de-
sired indoor temperature is shown within brackets.
START Indicates that there is a need for heat production or hot water and that the heat
pump will start.
EVU STOP Indicates that the additional function EVU is active. EVU is used to switch off the
heat pump during high energy tariffs.
NO HEAT DEMAND Indicates that there is no heating or hot water production demand.
NO COOLING DEMAND Indicates that there is no cooling demand.
COMPRESSOR START --
XX
Indicates that there is a need for heat, hot water or cooling and that the heat pump
will start in XX minutes.
COMPRESSOR
+IMM.HEAT
Indicates that heat production is active with both compressor and auxiliary heater.
START_MIN Indicates that there is a demand for heating or hot water production but that a start
delay is active.
AUX. HEATER Indicates that there is an auxiliary heater demand.
ACT COOLING Displayed if cooling is active.
DEFROST Displayed when defrosting is active.
4.4 Main Menu
The display's INFORMATION menu is used to set and adjust the heat pump functions and is opened by pressing
the left or right buttons. The appearance of the menu will vary depending on the menu selection made and
connected accessories. The basic menu appears as follows:
INFORMATION
OPERAT.
HEATING
HOT WATER
DEFROST
CALENDAR
2
1
3
4
1. Sub-menus
2. Return
3. Cursor
4. If an arrow is shown, it indicates that more sub menus are
continued underneath
Press the + and - buttons to move the cursor between the sub-menus. Press the right button to select a sub-
menu. Press the left button to go back in the menu.
User Guide iTec Eco
Thermia AB AWIE01UG102
11