Thermia Calibra Cool, Руководство по установке

Страница: 15 / 44

5 Connection, brine
5.1 Brine connection, alternatives
1. Left knock-out
2. Right knock-out
3. Top knock-out
1
2
3
Equipment set-up for installing
Filler cock
If the level vessel cannot be installed at the highest point or the thermic expansion of the brine
is expected to exceed the volume of the vessel it should be considered to install a pressure ves-
sel instead. Picture showing a common layout for BW model of filling device, level vessel and
safety valve. (For WW model, filling device and level vessel may not be applicable, but a dirt
strainer shall be fitted anyway.)
Installation Guide Calibra Cool
Thermia AB BWCC01IG0102
15