THERMAL INTEGRATION DATA Extra HIU, Руководство по установке

Страница: 41 / 42

The DATA Extra HIU, Installation Instructions DE2, 12th August 2021
Guarantees and After Sales Backup for HIUs
Heat Interface Units (HIUs) carry the following guarantees as standard:
FACTORY WARRANTY
1. The warranty begins on the date of delivery. A dated delivery note will be issued to the customer and a copy will be stored by Thermal
integration.
2. 12 Months Parts and labour - Parts or labour proven to be defective will be replaced / repaired free of charge for a period of 12
months from date of delivery, provided the HIU is installed by a qualified engineer within 6 months of date of delivery.
24 Months Parts Only - Parts proven to be defective will be supplied free of charge (for fitting by others) for a period of 24 months
from date of delivery.
3. Replacement of parts under warranty does not extend the duration of the warranty.
4. Any other costs are not covered by this warranty. All other damages of any nature whatsoever and howsoever arising, are expressly
excluded from this guarantee.
5. The warranty conditions above only apply:
a. In the UK only on items provided exclusively by Thermal Integration.
b. If the product is installed by a Thermal Integration approved engineer in compliance with the installation instructions.
c. The installer must complete the commissioning checklist in full at the time the HIU is installed. This checklist must be returned to
Thermal Integration within 30 days of commissioning. Checklists are enclosed in the HIU installation instructions.
d. If the installation complies with all current and relevant building regulations and codes of practice. (including the requirement to
clean the primary and secondary heating systems and add corrosion inhibitor in line with BS7593:2006)
e. If the product is used and maintained exclusively according to the manufacturer's instructions and proof of periodic inspection /
maintenance by a Thermal Integration approved engineer is available.
f. If the returned item is accompanied by a fully completed Thermal Integration Warranty Return Form.
6. Excluded are defects caused by:
a. Failure to maintain in accordance with manufacturers instructions.
b. Improper use.
c. Any attempt at repairs / maintenance by un-qualified persons.
d. where parts other than Thermal Integration Genuine Parts have been used in any service or repair.
e. Lightning, fire or natural disasters.
f. Deterioration and / or pollution from the district heating system or water network, either domestic hot water or heating side.
g. PH values of the primary medium being less than 7.5 or greater than 9.0.
h. Harmful additives to the heating water.
Page 41