Thermal Dynamics A80 CUTMASTER Скачать руководство пользователя страница 2

Страница: 2 / 130

WE APPRECIATE YOUR BUSINESS!

Congratulations on your new Thermal Dynamics product. We are proud to have you as our

customer and will strive to provide you with the best service and reliability in the industry.

This product is backed by our extensive warranty and world-wide service network. To lo-

cate your nearest distributor or service agency call 1-800-426-1888, or visit us on the web at

www.thermal-dynamics.com

This Operating Manual has been designed to instruct you on the correct use and operation of

your Thermal Dynamics product. Your satisfaction with this product and its safe operation is

our ultimate concern. Therefore please take the time to read the entire manual, especially the

Safety Precautions. They will help you to avoid potential hazards that may exist when working

with this product.

YOU ARE IN GOOD COMPANY!

The Brand of Choice for Contractors and Fabricators Worldwide.

Thermal Dynamics is a Global Brand of manual and automation Plasma Cutting Products for

Thermal Dynamics Corporation.

We distinguish ourselves from our competition through market-leading, dependable products

that have stood the test of time. We pride ourselves on technical innovation, competitive prices,

excellent delivery, superior customer service and technical support, together with excellence in

sales and marketing expertise.

Above all, we are committed to developing technologically advanced products to achieve a safer

working environment within the welding industry.

Содержание A80 CUTMASTER



































































































































Результаты поиска

Содержание A80 CUTMASTER

Отзывы:

Thermal Dynamics A80 CUTMASTER, Руководство по эксплуатации, Страница: 2 / 130

Результаты поиска

Содержание A80 CUTMASTER

Отзывы: