Thermal Care NQ Series, Руководство по установке и эксплуатации

Страница: 54 / 76

48
Table 15 - Controller Program Menu
Item Name Item Code Default Value Range
Alarm Delay - High Deviation AdH 30 10 to 60
Alarm Delay - Low Deviation AdL 30 10 to 60
Autostart Enabled ASE DIS Disabled (DIS) or Enabled (EnA)
Brownout Enabled brn EnA Disabled (DIS) or Enabled (EnA)
Comm Baud Rate bAU 96 12 to 96
Comm Modbus ID id 1 1 to 247
Comm SPI Address SPA 32 32 to 63
Communications Type COt OFF OFF, Retransmit (rEt), SPI (SPI) or ModBus (bUS)
Compressor 1 Negative Spread nS1 4 1 to 10
Compressor 1 Positive Spread PS1 2 1 to 10
Compressor 2 Enabled CO2 DIS Disabled (DIS) or Enabled (EnA)
Compressor 2 Negative Spread nS2 5 1 to 10
Compressor 2 Positive Spread PS2 3 1 to 10
Derivative dEr 3 0 to 200
Display Units Unt F F to C
Freezestat Limit FSL 40 -50 to 40
High Deviation Alarm Limit HId 10 5 to 100
Integral Int 25 1 to 800
Low Deviation Alarm Limit Lod 10 5 to 100
Proportional Band bnd 8 1 to 300
Remote Setpoint High Limit rSH 65 Between rSL and 999
Remote Setpoint Low Limit rSL 20 Between -99 and rSH
Remote SP Enabled rSE DIS Disabled (DIS) or Enabled (EnA)
Retransmit Range High rEH 150 Between 999 and rEL
Retransmit Range Low rEL 0 Between -99 and rEH
User High Safety Limit HSU 140 Between factory low and high limits
User Low Safety Limit LSU 10 Between factory low and high limits
User Password UPA 000 0 to 999