Thermador TCOOKSENSW, Инструкция по использованию и уходу

Страница: 6 / 20

en
6
Caution!
Do not use any metal objects to
remove the battery. Do not touch the
battery connection points.
3.
Close the closure of the temperature
sensor (the notches for the screws
on the closure must align with the
notches on the lower section of the
housing). Tighten the screws with a
screwdriver.
4.
Reattach the silicone cover to the
lower section of the temperature
sensor housing.
Note:
Use only high-quality batteries of
the type CR2032 in order to guarantee
a long service life.
Cleaning
Temperature sensor
Clean the temperature sensor with a
damp cloth. Never clean it in the
dishwasher. Do not immerse it in water
or clean it under running water.
Remove the temperature sensor from
the saucepan after cooking. Store it in a
clean, safe place (such as in its
packaging) away from sources of heat.
Silicone patch
Clean and dry before attaching to the
temperature sensor. Dishwasher safe.
Note:
Cookware with the silicone patch
must not be left to soak for long periods
in soapy water.
Temperature sensor window
The sensor window must always be
clean and dry. Proceed as follows:
■
Remove dirt and oil splatters
regularly.
■
Use a soft cloth or cotton buds and
window cleaner for cleaning.
Notes
■
Do not use abrasive cleaning agents
such as scouring pads, scrubbing
brushes or cream cleaners.
■
Do not touch the sensor window with
your fingers. This may make it dirty
or scratch it.