19
4. Press
ENTER
.
5. Turn the mode knob
to
CONV BAKE
and the
TEMPERATURE
knob to the recipe temperature.
–
The oven automatically reduces the input
temperature by 25°F (14 °C) to the correct
temperature.
6. Allow oven to preheat and place food inside.
Setting the oven offset
The offset feature allows the cook to further fine-tune
their cooking parameters to their own personal optimal
settings by allowing them to adjust the temperature offset
of the oven by +/-35°F in increments of 5°F. This feature is
useful if you find that food is consistently either too brown
or too light for your tastes.
•
The offset feature is available for all modes except
self-clean.
•
By default, the offset temperature is set at 0°.
•
The unit will continue to run the input offset value
indefinitely until the user manually changes it.
Setting the oven offset with a digital display
1. Begin from the
STANDBY
mode and select
SETTINGS
.
2. Press the left
(
or
)
button to scroll
TEMP OFFSET:
RIGHT/LEFT OVEN
.
3. Press the right
(
or
)
to set the temperature.
4. Press
ENTER
.
Setting the oven offset on ovens without a digital
display
IMPORTANT:
Offset must be initiated within 5 minutes of
a power reset and must be started with the door closed.
All knobs must be set to
OFF
. The door latch (if applicable)
must be unlocked.
1. Reset the power at the breaker box.
Note:
Power must remain off for at least 20 seconds.
2. Open the oven door.
3. Rotate the mode knob to
BROIL
and the temperature
knob to
350
.
4. Close the oven door.
5. Rotate the temperature knob back to
OFF
.
Note
: Steps 3, 4, and 5 must be completed within 5
seconds after door is opened (step #2).
–
All oven LEDs will flash four times to indicate the
temperature offset has been initiated.
NOTE:
If the mode knob is rotated to any position other
than
OFF
or if more than 1 minute passes with no activity
while setting the temperature offset mode, the mode is
exited without any change to the offset. All LEDs flash 8
times to indicate the offset has been exited.
Setting the cooking mode and oven
temperature
1. Place rack in desired rack position and shut the door.
2. Turn the
MODE
knob to
BAKE,
for example.
3. Turn the
TEMPERATURE
knob.
–
The blue preheating bar moves to the right as the
oven heats up.
4. After oven has preheated, place food inside.
Setting the timers
•
The
KITCHEN TIMER
can be set for up to 24 hours. It
can be used despite whether the range is in operation
and independently of all other functions. The
appliance does not switch on and off automatically.
•
With the
OVEN TIMER,
the appliance switches off
automatically when the desired cooking time is
complete.
•
Use the
END TIMER
to delay the cooking time to end
at a later time. For example, it is 4:00 PM. The dish
requires a cooking time of 40 minutes. You want it to
be ready at 5:30. Enter the cooking time and delay the
cooking time end until 5:30. The appliance starts
automatically at 4:50 and switches off at 5:30.
Setting the kitchen timer
1. Press
TIMERS
.
2. Press the left
(
or
)
and select
KITCHEN TIMER
.
3. Press the right
(
or
)
to set your desired time and press
ENTER
.
–
A beep sounds when the timer ends. Press
ENTER
to terminate the beep and timer.
Changing a running timer
1. Press
TIMERS
.
2. Press the right
(
or
)
to set your desired time and press
ENTER
.
Setting the oven timer
1. Turn the
MODE
knob to
BAKE,
for example.
2. Turn the
TEMPERATURE
knob to 350°F, for example.
Knob position
Temperature offset value (°F)
225
-50
250
-40
275
-30
300
-20
325
-10
350
0
375
10
400
20
425
30
450
40
475
50
