10
8.
Stand front wall (Figure 5, page 5) on base, with
channeled edge up. Slide front wall into vertical
channel on side and insert three furniture bolts into
holes in sidewall into front wall (do not tighten).
At this stage begin to tighten bolts continuing
around sauna. Tighten bolts securely.
9.
Screw two furniture bolts (Figure 12, page 6) into
holes in threshold inside door opening. Note:
Some adjusting may be necessary to line up holes
in threshold and threaded receivers in base using
hex wrench provided.
10.
Front edge of seat top (Figure 8, page 5) is
finished. With finished edge toward you slide both
left and right seat tops all the way to back wall so
it rests on supports provided. Seat is reversible to
your preference.
11.
Set roof (Figure 6, page 5) on sauna making sure
top trim extends down over walls all the way
around. If trim does not extend over walls all the
way around, rotate top ¼ turn.
12.
Install light plug connector on light (Figure 10,
page 6) into connector coming out of front wall.
Screw securely to the wall with light mounting
screw (Figure 11, page 6).
Fully Assembled Th.
Fully Assembled TheraSauna.
