pH Wireless Ver.21-7 8
ELECTRICAL INSTALATION
Power supply
Connect the 230 VAC power supply cable plug into a mains power point
provided
with a protective earthing conductor (PE)
OPERATING
Priming
Once all different elements have been installed, push the priming button [3] to
make the peristaltic pump turn until the acid in the tube has reached the injection
point.
Reception LED indicator (blue)
As soon as you have activated the pH function in the chlorinator the Wireless
pump will start receiving dosing data from the chlorinator and the blue indicator will
blink every second. When the pH function is activated the chlorinator will send
data continuously to the pump even if the pH is correct and no dosing is neces-
sary. If the pump stops receiving data (no blue blinking) it will stop dosing a few
seconds later. The manual priming will still be operational even when the wireless
connection is interrupted.
TECHNICAL DATA
Power supply
100-240 VAC 50-60 Hz
Consumption
11 W
Pump Flow rate
1.5 l/h
Maximum pressure 1.5 bar
Dimensions (mm)
90 x 135 x 120
