ThePondguy SolidFlo 1200 Скачать руководство пользователя страница 1

SolidFlo

Solid Handling 

Pumps

Installation Manual

TM

View other great products on-line at www.thepondguy.com

Important Information .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2

Package Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 3

Technical Specs  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 3

Installing Your SolidFlo™ Pump .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4

Maintaining Your SolidFlo™ Pump   .  .  .  .  .  .  .  .  .  .  .  .  5-7

Replacement Parts   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 8  

Troubleshooting .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 8

Warranty Information .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 8

Table of Contents:

MODEL

DESCRIPTION

ITEM NUMBER

SolidFlo™ 600 - 2600

Replacement fitting kit (includes barbed fitting and knuckle)

#120847

Pump does not turn on:
  • Check that the power cord is connected.  
  • Check to see if the circuit breaker is tripped.  
  • GFCI may be faulty. 
  • Check power cord for damage.
Pump turns on and then shuts off:
  • Verify pump is completely submerged for proper cooling.
  • Check for debris clogging the pump intake.
  •  Verify if using an extension cord that it is of the proper rating for the pumps  

electrical requirements. 

Reduced water flow:
  • Check for debris clogging the pump pre-filter. 
  • Perform annual maintenance cleaning of the pump.
  • Verify that water level is not low.
  • Check plumbing for clogs.  

SolidFlo™ Solid Handling Pumps carry a 3-year warranty. The Pond Guy® will repair or 

replace any units found to be defective. This limited warranty is extended exclusively 

to the original purchaser and begins from the date of original purchase receipt. Abuse 

or misuse of this product or power cord alterations void all warranty. Please call for a 

Return Authorization Number prior to returning product by calling our Customer Care 

Department at 866-766-3435. Failure to request an RMA number may result in delay or 

dismissal of your warranty claim.

 THANK YOU FOR CHOOSING:

The Pond Guy

®

 Inc .

We Know Ponds

15425 Chets Way

Armada, MI 48005

866-POND-HELP (766-3435)

thepondguy.com

For Models:

• SolidFlo

 600

 

(Item #120845)

• SolidFlo

 1200

 

(Item #120842)

• SolidFlo

 1600

 

(Item #120843)

• SolidFlo

 2100

 

(Item #120844)

• SolidFlo

 2600

 

(Item #120846)

Содержание SolidFlo 1200

Страница 1: ...mps electrical requirements Reduced water flow Check for debris clogging the pump pre filter Perform annual maintenance cleaning of the pump Verify that water level is not low Check plumbing for clogs PRODUCT WARRANTY SolidFlo Solid Handling Pumps carry a 3 year warranty The Pond Guy will repair or replace any units found to be defective This limited warranty is extended exclusively to the origina...

Страница 2: ...mpt to use a wet plug The SolidFlo Pump is NOT suitable for use in swimming pools swimming ponds or other situations where bodily contact is made with the water CAUTION To reduce the risk of equipment damage or failure DO NOT place SolidFlo Pump near flammable or other dangerous materials or objects ALWAYS unplug the unit if there is no water running through it to prevent over heating ALWAYS opera...

Страница 3: ...ance MODEL PLUMBING SolidFlo 600 1 SolidFlo 1200 1 11 4 SolidFlo 1600 11 4 SolidFlo 2100 11 4 11 2 SolidFlo 2600 11 4 11 2 Step 4 Submerge Pump SUBMERGE the SolidFlo Pump in a flat area in your pond Ideally this should be at the opposite end of the pond from where the water will discharge Step 5 Start your Pump PLUG the power cord into a standard 120 volt GFCI protected outlet Step 3 Connect Plumb...

Страница 4: ...sing to separate it from the motor housing PLACE the impeller onto the shaft by aligning the flat edge of the impeller with the flat edge on the shaft Then press firmly to secure into place REMOVE the impeller by using to flathead screw drivers to gently separate it from the rest of the impeller assembly PEEL the screen from the bearing gently using your pick tool PULL gently to separate the entir...

Отзывы: