Themis RES - 32XR3, Руководство по установке

Страница: 72 / 142

RES-21XR3 for X8SAX Installation Manual
3-6
Themis Computer
3.3.1.3 AddOn ROM Display Mode
This sets the display mode for Option ROM. The options are Force BIOS (default)
and Keep Current.
3.3.1.4 Bootup Num-Lock
This feature selects the Power-on state for the Numlock key. The options are Off and
On (default).
3.3.1.5 PS/2 Mouse Support
This feature enables support for the PS/2 mouse. The options are Disabled, Enabled,
and
Auto (default).
3.3.1.6 Wait For 'F1' If Error
This forces the system to wait until the 'F1' key is pressed if an error occurs. The
options are Disabled and
Enabled (default).
3.3.1.7 Hit 'Del' Message Display
This feature displays “Press DEL to run Setup” during POST. The options are
Enabled (default) and Disabled.
3.3.1.8 Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and
Disabled (default).
3.3.1.9 Power Button Function
If set to Instant_Off, the system will power off immediately as soon as the user hits
the power button. If set to 4_Second_Override, the system will power off when the
user presses the power button for 4 seconds or longer. The options are
Instant_Off
(default) and 4_Second_Override.
3.3.1.10 Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for the
power to remain off after a power loss. Select Power-On for the power to be turned
on after a power loss. Select Last State to allow the system to resume its last state
before a power loss. The options are Power-On, Power-Off and
Last State (default).